 |
|
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Prime Output Power:: | 100kw/125kva | Stamford Alternator Model:: | UCM274E |
|---|---|---|---|
| Governor Type:: | ELECTRIC TYPE | DRIVE ENGINE:: | 6CT8.3-GM |
| Fuel Consumption At Rated Power:: | 209g/kw.hr | Frequency:: | 50 Hz |
| High Light: | portable marine generator,marine diesel genset |
||
100KW /125KVA CUMMINS MARINE GENSET HEAT EXCHANGER SEA WATER PUMP CCS
Cummins series marine main generator set and emergency set are provided, the power range from 20KW TO 1600KW, compact unit is easy to install, with low fuel consumption, good dynamic performance, high efficiency. The ship certificate of CCS, BV,NK or other major classification society can be provided.
| Generator Set Model: | CCFJ100J |
| Performance of Generator Set: | 400V,3phases,50Hz |
| Output:100kw/125kva | |
| Prime Output Power: | 100kw/125kva |
| Rating Conditions: | In accordance with ISO-3046 reference conditions: |
| -Air Pressure | 100 Kpa |
| -Air Temperatur | 45℃ |
| -Relative Humidity | 95% |
| - Power Deration | Operation at elevated temperature for sustained operation above 45℃ , derate by 2% per 11℃ . |
| Voltage | 30VAC |
| Frequency | 50Hz |
| Speed | 1500 RPM |
| P.F. | 0.8 |
| Phase/Wire | 3/3 |
| Governor Type: | ELECTRIC TYPE |
| Recovery time | 5 s |
| Frequency Variation Variation in Steady State | 3% |
| Momentary Voltage Variation | －15％,＋20％ |
| Voltage Regulation in Steady State | 2.50% |
| Voltage Variation in Steady State | 3% |
| Recovery time | 1.5 s |
| Engine Model: | 6CT8.3-G(M) |
| - Prime Rating | 115KW @ 1500 RPM |
| No. of cycle | 4 |
| - Bore x stroke | 114 mm x 114mm |
| -Aspiration | Turbocharger , aftercooler |
| -Maximum Allowed Restriction to Fuel Pump | 20 Kpa |
| -Maximum Allowed Return Line Pressure | 8 Kpa |
| -Fuel Consumption at rated power | 209g/kw.hr (engine only) |
| Exhaust System | |
| -Maximum Allowed Back Pressure | 10 K Pa (3 in. Hg) |
| -Recommended New Engine Allowed Back Pressure | 5 K Pa (1.5 in. Hg) |
| -Maximum Allowed Intake Restriction | 635 mm H2O |
| -Oil Pan Capacity, High/Low (Standard) | 8.3Liters |
| Front Down | 30° |
| Front Up | 38° |
| Side to Side | 38 ° |
| Electrical System | 24 V DC |
| Starting system | 24VDC starting motor, 24VDC |
| Cold start temperature | 0 ℃ |
| Fuel Oil | Diesel Oil is Grade No. 2-D requirements of the American Society for Testing and Materials (ASTM) ,Or China Fuel Type 0 – GB 252-8 (Grade 1 & Special Grade ) as equivalent, or China Fuel Type -10 – GB 252-87 |
| ( grade 1 & special grade ) as equivalent | |
| Lube Oil | SAE 15W-40, |
| Grade CE, CF-4/SG, CG-4/SH or CH-4/SJ | |
| Coolant | 50-50 Ethylene Glycol/Water and Adequate |
| concentration of DCA4 | |
| Main Alternator Model | Cummins WUXI Stamford UCM274E |
| Configuration of Main Alternator | Brushless |
| Single bearing | |
| Air cooling | |
| - Capacity | 125KVA |
| - p.f. | 0.8 |
| - Voltage | 400VAC |
| - Frequency | 50 Hz |
| - Insulation System | H |
| - Temperature rise | F |
| - Protection Class | IP23 |
| - Phase/Wire | 3/3 |
| - POLES | 4 |
MARINE GENERATING SET,CONSISTING OF ( PER UNIT)
G - DRIVE ENGINE, 6CT8.3-GM, WITH FOLLOWING EQUIPMENT:
1.1.4 CRANKCASE VENT LINE
1.2 COOLING SYSTEM
1.2.1 FRESH WATER PUM,CENTRIFUGAL TAPY
1.2.2 THERMOSTAT , FOR FRESH WATER
1.2.3 WATER FILTER
1.2.4 SEA WATER PUMP
1.2.5 HEAT EXCHANGER
1.3 LUB OIL SYSTEM
1.3.1 OIL PUMP
1.3.2 OIL FILTER
1.3.3 OIL COOLER
1.3.4 OIL DIPSTICK
1.3.5 OIL PAN
1.4 FUEL OIL SYSTEM
1.4.1 FUEL FILTER
1.4.2 FUEL PUMP WITH ELECTRIC GOVERNOR
1.4.4 FUEL/WATER SEPARATOR
1.4.5 FUEL INLET/OUTLET FLEXIBLE SECTION
1.5 EXHAUST SYSTEM
1.5.1 EXHAUST ELBOW
1.5.2 EXHAUST FLEXIBLE SECTION AS LOOSE
1.5.3 SPARKLESS MUFFLER AS LOOSE
1.5.4 FLANGE AS LOOSE
1.6 STARTING SYSTEM
1.6.2 24VDC START MOTOR
1.6.3 MOUNTED ALTERNATOR
2. ALTERNATOR UCM274E, UCM274E
2.1 AVR
2.2 SPACE HEATER , 220VAC
2.3 ONE POTENTIALMETER FOR VOLTAGE ADJUST AS LOOSE
LOCAL CONTROL PANEL
3.1 OIL PRESS GAUGE
3.2 WATER TEMP. GAUGE
3.3 HOURMETER
3.4 FREQUENCY METER
3.5 POWER VOLTAGE
3.6 START/STOP SWITCH
3.7 EMERGNECY STOP BUTTON
3.8 TEST/RESET SWITCH
3.9 MONITORING SYSTEM:
MONITORING SYSTEM FOR
4. GENSET CONSTRUCTION:
- STRONG COMMON BASEKID
- ENGINE AND ALTERNATOR FLEXIBLE MOUNTING WITH ISOLATORS
- BATTERIES
5.
QULIFICATION CERTIFICATE AND TEST REPORT
6. DRAWINGS AND DOCUMENT
6.1) 2 copies of the followings approval drawings & documents should be submitted within 4 weeks after signing the contract
6.2) 2 copies of working drawing &document should be submitted with 14 working days after received confirmation,( The approval drawing will be confirmed as working drawing if not received confirmation within 2 weeks )
6.3) One copy per genset of final document should be submitted while genset delivered
7. ONE SET OF CUMMINS STANDARD TOOLS PER ENGINE, MADE IN CHINA
Our Adervantage:
1. We are the original supplier of CCEC engine assembly and engine parts.
2. We can give strong technical support.
3. We can matching the engine assembly and parts quickly and accurately.
4. We can produce according to the special requirements of the customers.
FQL:
Q1. Can you provide technical support?
A: Yes, As an OEM branch of CCEC, we can provide strong technical support for you. and we can
provide other brands of generators and lister.
Q2: If I only had the engine NO, Can you find the matching parts quickly for me?
A: Yes, we are equipped with CCEC QuickService Online System that enables us to provide information of CCEC engine assembly and parts quickly and accurately.
Q3: How long is the production time of the goods?
A: We have a lot of regular inventory of the parts, it will take 3-7 days after receiving your advance payment. and the engine assembly delivery time depends on the items and specification of customers.
Q4: What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We will show you the photos of the goods and packages before you pay the balance.
Q5. What is your packing method?
A: Generally, the engine assembly is packed in wooden case, the parts is packed in carton. And we can also according to customers requests.
Contact Person: Henry Shawn
Tel: 86-13761066312
